Call Park 35
4. Depress the hookswitch momentarily. An intercom dial
tone will sound.
5. Dial [438]. The first call is returned and the second call will
be placed into personal park.
Call Park - Station
Call park (by station number) allows calls to be parked at a
station other than your own, thus allowing for expanded park
locations.
To create a CALL PARK (Station) button:
1. Press [SPEED] + [SPEED].
2. Press the desired flexible button.
3. Dial [439] + [#]. A confirmation tome sounds.
To use Call Park (Station), while connected to an outside
line:
1. Press the TRANS button.
2. Dial [439] + [XXX] (XXX=station number).
-or-
1. Press the TRANS button.
2. Press the preprogrammed CALL PARK (Station) button.
3. Dial [XXX] (XXX = station number).
To retrieve a Call Park (Station) call:
Dial [# 6] + [XXX] while at any telephone in the system,
including the initiator’s. [XXX] = the station number used to
park the call.
-or-
Dial [438] from the initiator’s station.
The user can alternately connect to the other call
by doing a hook flash and dialing [438] as many
times as necessary.
To Next Page
Loading...
Need help?
General
