– First insert all securing bolts -arrows- and tighten lightly.
– Then tighten all securing bolts. Specified torque:
⇒ Item 18 (page 59) .
– Then tighten the three securing bolts -arrows- of cylinder head
cover to specified torque. Specified torque:
⇒ Item 5 (page 58) .
– Install vacuum pump ⇒ page 70 .
Further assembly is basically a reverse of the dismantling se‐
quence.
4.6 Removing and installing valve stem seals
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
116 Rep. gr.15 - Cylinder head, valve gear
To Next Page
Loading...
Need help?
General
