47
TIME1 Time frame 1 for measurement and calculation of PI/DAR
TIME2 Time frame 2 for measurement and calculation of PI/DAR
Symbol for upwards
Symbol for downwards
HOLD, H Call up/switch off/activate Data Hold function
OL Overload indicator; the measuring range was exceeded
Battery replacement symbol
Symbol for the acoustic continuity tester
V
AC Alternating voltage
V
DC Direct voltage
V Volt (unit of electrical voltage)
Ω, Ohm (unit of electrical resistance)
kΩ, MΩ, GΩ Kilohm (exp.3), megohm (exp.6), gigohm (exp.9)
Bar graph
Indicates hazardous contact voltage
Symbol for display lighting
Symbol for inserted fuse
Symbol for inserted batteries
To Next Page
Loading...
