39
American ash tree Elm
Japanese ash tree Walnut
Aspen White birch
Spruce White beech
Yellow beech White maple
Yellow pine Cedar
c) Building Moisture Measurement “BUILD”
After activation, push the button “MODE” briefl y once to switch to building material moisture
mode “BUILD”. There are four different pre-set characteristic curves (“B1” – “B2” – “B3” –
“B4”). Select the right characteristic curve by pushing the “SET“ button.
The correct characteristic curve for your building material can be taken from the following
table. For more building materials and the associated indicator value, see chapter 9, b.
Building material
01 02 03 04
Plaster Aerated concrete Screed Concrete
To Next Page
Loading...
