24
2. INTENDED USE
The battery-operated material-moisture meter measures the moisture in materials such as
wood and building materials, plaster, screed, etc. For a high measuring accuracy, several ma-
terial characteristic curves are available. A bar scale, indicator scale and direct value display
facilitate reading on the LC display.
The circular connector with automatic lock can be used optionally to connect an external
sensor.
The device must only be operated with the specifi ed battery type.
The meter must not be operated when it is open, i.e. with an open battery compartment or
when the battery cover is missing. Measurement sin moist rooms or under detriment ambience
conditions such as wetness, dust, fl ammable gases, vapours, solvents, thunderstorm or strong
electrostatic fi elds are not permissible.
For safety reasons, only use sensors or measuring accessories which are adjusted to the
specifi cations of the meter when measuring.
Any use other than that described above damages the product. Moreover, this is linked to
dangers such as short circuit, fi re, electric shock, etc. No part of the product must be modifi ed
or converted!
Read the operating instructions carefully and keep them for later reference.
Always observe the safety information!
To Next Page
Loading...
