44
18. INFORMATION ON THE CHARGER
Various information is indicated on the display during a charge/discharge process by repeatedly pressing the button
"DEC". If you do not push any button for a few seconds, the charger will return to the normal display.
The information that can be displayed depends on the connected rechargeable battery type.
Voltage of the battery at the end of charging/discharging
Input voltage
Display of the temperature at the external temperature sensor
If no external temperature sensor is connected (not enclosed, can be ordered separately), "Ext.Temp" will
display "0C".
Duration for safety timer
Battery capacity for safety cut-off
End Voltage
12.6V(3S)
IN Power Voltage
14.93V
Ext.Temp 0C
Int.Temp 27C
Safety timer
ON 200min
Capacity Cut-off
ON 5000mAh
To Next Page
Loading...
