EasyManua.ls Logo

VOLTCRAFT V-CHARGE 50 - 21. TECHNICAL DATA

VOLTCRAFT V-CHARGE 50
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
21. TECHNICAL DATA
Operating voltage ....................................Mains voltage input: 100 - 240 V/AC, 50/60 Hz (max. 1,0 A)
Direct voltage input: 11 - 18 V/DC (max. 6,5 A)
Never use both inputs at the same time. This may damage the charger. Loss of guarantee/warranty!
Output voltage .........................................max. 25.2 V (at the charge sockets)
Charging/discharging channels ...............1
Charge current .........................................0.1 - 7.0 A (depending on the cell number and rechargeable battery type)
Charging output .......................................max. 50 W
Discharge current ....................................0.1 - 2.0 A (depending on the cell number and rechargeable battery type)
Discharging power ................................... max. 5 W
Suitable rechargeable batteries ............... NiMH/NiCd, 1 - 15 cells
LiPo/LiIon/LiFe, 1 - 6 cells
Pb, 1 - 10 cells (rated voltage 2 - 20 V)
Discharging current for balancer .............LiPo/LiIon/LiFe: 300 mA per cell
Delta-U detection ..................................... NiMH/NiCd: 3 - 15 mV/cell (adjustable)
Safety timer .............................................10 - 720 minutes, can be switched off
Ambient conditions ..................................Temperature +10 °C to +40 °C; humidity 0% to 90% relative, non-condens-
ing
Weight .....................................................Approx. 600 g
Dimensions .............................................. Approx. 137 x 147.5 x 45 mm (W x D x H)

Table of Contents

Related product manuals