EasyManua.ls Logo

Volvo Penta D3 - Maintenance Schedule; Initial and Interval Service

Volvo Penta D3
142 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Emergency Trimming
If a situation occurs that needs the drive to be trimmed
over the trim limit, the drive can be emergency trim-
med.
IMPORTANT!
When emergency trimming is performed, the auto-
matic stop will not work. The drive can be trimmed
outside the trim ranges, this can damage the boat and
drive.
1 Press the trim button on the control or power trim
panel in the direction the drive needs to be trim-
med. Release the button when the trim limit is
reached.
2 Press the button again and hold it depressed for
more than 5 seconds. The drive starts trimming.
Start after crash-stop
If the engine crash-stops, the following routine must be
performed before the engine can be started again.
1 Move control lever(s) to neutral.
2 Acknowledge any alarms and turn the ignition off.
3 Wait until the system is completely shut down and
all lamps are out.
4 Turn the ignitionon but do not start the engine.
5 Acknowledge any alarms. Start the engine.
In Case of Emergency
47705992 05-2015 © AB VOLVO PENTA 73

Related product manuals