Seawater Filter, Check and Cleaning
WARNING!
Risk of water entry. Close the seawater cocks before
doing any work on the seawater system.
If the water where the boat is used contains
contaminants, seaweed, etc. the filter should be
checked more frequently than stated in the
maintenance schedule. Otherwise there is a risk that
the filter may be blocked resulting engine overheating.
1 Close the sea cock.
2 Release the clamp (1) and remove the sealing plate
(2).
3 Lift out the insert (3) and clean it.
4 Replace parts as illustrated.
5 Open the sea cock and check for leaks.
Maintenance
132 47712786 11-2022 © AB VOLVO PENTA
To Next Page
Loading...
