50
Repair - MS2 reverse gear and upper gear housing, sailboat drive
121. Reverse gear MS2
Install the dipstick. Fill up with oil.
Please refer to
Technical Data
for oil volume, grade
and viscosity.
Check the oil level with the dipstick and install the oil
filler cap.
125. Drive, 120S, 120S-B, -C, -D, -E
Install the dipstick and oil filler cap.
The lower gear must be installed before the oil is put
in.
Please refer to
Technical Data
for oil volume, grade
and viscosity.
120. Install the gear change mechanism in the reverse
gear housing. Please refer to items 10-13.
To Next Page
Loading...
