Volvo Penta MS2A-E - Input Bearing Housing, Installation

28
Repair - MS2 reverse gear and upper gear housing, sailboat drive
884729
9991801
884731
884732
1
35. Press the small outer bearing race into the bearing
housing. Use tool no. 884732.
36. Press the large outer bearing race into the bearing
housing. Use tool no. 884731 and shaft 9991801.
Input bearing housing,
installation.
37. Put the metal sheet (1) on the drive shaft.
38. Press the large roller bearing onto the drive shaft.
Use tool no. 884729.