57
Repair of MS2V reverse gear, angle gear
24. Apply sealant, Volvo Penta part no. 1161099-5 to
the cover and install a new seal ring. Use tool no.
884834 and shaft 884859. Wipe some grease, Volvo
Penta part no. 828250-1 on the lip of the seal ring.
25. Install the bearing race in the cover with tool
884855 and shaft 884859.
26. Put the cover in the tubular shaft and press the
roller bearing on with sleeve no. 884833. Press the
bearing all the way down to the step on the shaft.
27. Press the crown wheel on with sleeve no. 884833.
884833
884833
884859
884855
884859
884834
To Next Page
Loading...
