Volvo B 21 - Flywheel, Clutch, and Carrier Plate Installation

-~
I"
'[
{
t
Group 21 Reconditioning engine
Assembly
1981 - 1984
021
Secure oil trap drain hose
Secure bracket for drain hose to oil pump retaining
screw.
Make sure that hose
isclamped behind lug on oit pump.
Import8nt: Do not shorten hose.lt is importent thet hose is
of exact length.
022
Install:
- oil sump gasket. Turn mark on gaskella face slarter
motor mount.
oil sump
support
bracke!. Do not tighten balts at this stage.
FLYWHEEL, CLUTCH, CARRIER PLATE
Manual gearboxes
Install:
pilot bearing in crankshah using drift 1426
-
lock ring.
Automatic transmissions
Install:
023
024
- guide slee"'e with bevetled end facing outward.
37