115
Technical Data
Note! Mineral based oil, either fully or semi-synthetic, can be used on condition that it complies with the quality
requirements above.
VDS =Volvo Drain Specification
ACEA = Association des Constructeurs Européenne d’Automobiles
API = American Petroleum Institute
Global DHD = Global Diesel Heavy Duty
TBN = Total Base Number
Sulfur content in fuel, by weight
< 0,5 – 1,0 % > 1,0 %
3)
Oilgrade
1)
Oil change interval, reached first in operation
All engines: 200 h / 12 months 100 h / 12 months
VDS-2 and ACEA E7
2)
or VDS-2 and Global DHD-1
or VDS-2 and API CH-4
or VDS-2 and API CI-4
1)
When oil quality specifications are joined by “or” (Type 1, 2 and 3), either engine oil specification can be used.
When oil quality specifications are joined by “and” (Type 2 and 3), the engine oil must fulfill both requirements.
2)
ACEA E7 has replaced ACEA E5, but if available ACEA E5 can be used.
3)
If sulphur content is > 1.0 % by weight, use oil with TBN >15.
SAE 5W/30
30
20
10 ±0 +10 20 30 40
22
4
14 32 50 68 86 104
15
o
C
SAE 15W/40
25
o
C
SAE 10W/30
10
o
C
SAE 20W/30
±0
o
C
SAE 30
SAE 40
+10
o
C
o
C
o
F
11
11
1
Viscosity
Select the viscosity from the table below. Note! The temperature values refer to stable ambient temperatures.
* Refers to synthetic or semi-synthetic oils.
Lubrication system
Oil volume, (incl. oil filter)......................................... 12.5 liter (3.3 US gals) 20 liter (5.28 US gals)
Oil volume, oil filter .................................................. 1.6 liter (0.4 US gals) 1.6 liter (0.4 US gals)
Oil volume between min. and max. markings .......... 1.5 liter (0.4 US gals) 3.5 liter (0.9 US gals)
Oil grade.................................................................. See table below
Viscosity .................................................................. SAE 15W/40 (See table below)
Fuel specification
The fuel must comply with national and international standards for commercially supplied fuels, such as:
EN 590 (with nationally adapted environmental and cold requirements)
ASTM D 975 No. 1-D and 2-D
JIS KK 2204
Sulfur content: Complying with legal requirements in each country.
To Next Page
Loading...
