21
Instruments
Ignition lock
A tab with the key code accompanies the ignition
keys, and is used to order extra ignition keys. Do not
store the code where it is accessible to unauthorized
persons.
S = Stop position.
0 = Key can be inserted and removed.
I = System voltage on (drive position).
II = Not used.
III = Start position.
IMPORTANT! Read the starting instructions in
the “Engine starting” chapter.
Start/stop panel
The start/stop panel is used to start or stop the engi-
ne. The starter key on the main helm station must be
in position “I” (driving position) for the engine to start.
The engine can only be stopped if the control panel is
activated.
IMPORTANT! Read the starting instructions in
the “Engine starting” chapter.
To Next Page
Loading...
