Connecting to an attachment quick
coupler, hydraulic
WARNING
Risk of crushing.
Falling attachment could result in severe injury or
death.
Make sure that the attachment, hydraulic hoses and
connections are undamaged and securely
fastened.
1 Place the machine on firm and level ground.
2 Lower the dozer blade and the boom to the
ground.
3 Hook the attachment quick coupler onto the
hammer pin.
4 Press the attachment quick coupler switch to
open the attachment quick coupler (unlock
position). See page
38
for operating of the
attachment quick coupler switch. Then follow the
same procedure as for connecting to a bucket,
see page
112
.
NOTICE
Do not use the machine, if the attachment bracket
is not working correctly.
To Next Page
Loading...
