Disconnecting from an attachment
quick coupler, hydraulic
WARNING
Risk of crushing!
Attachments that move unexpectedly can cause
injuries.
Make sure people stay out of the working area when
connecting or disconnecting attachments.
1 Place the machine on firm and level ground.
2 Lower the dozer blade and the boom to the
ground.
3 Curl in the hammer completely towards the
dipper arm (to release the locking mechanism).
4 Press the attachment quick coupler switch to
open the attachment quick coupler (unlock
position). See page
38
for operating of the
attachment quick coupler switch. The follow the
same instructions as whe connecting to a
bucket, see page
112
To Next Page
Loading...
