Front windscreen rails
The front windscreen rails must be kept lubricated.
Start at one end of the rail and lubricate with grease
all the way to the other end.
Bucket and ripper teeth, replacing
WARNING
Risk of splinter injury.
When striking metal objects with a hammer, flying
metal chips could cause serious splinter injury to
eyes and other body parts.
Always wear personal protective equipment and
eye protection when replacing bucket teeth.
A special tool may be ordered to facilitate
replacement of teeth. The tool are available in
different sizes depending on tooth size. Contact
your dealer for further information.
Removing bucket tooth
1 Lower the bucket to the ground and angle it
slightly upward.
2 Clean the opening for tooth adapter locking
device.
3 Knock out the locking device with a hammer and
the special tool or other suitable drift.
4 Remove tooth.
To Next Page
Loading...
