AUDIO AND MEDIA
59
Related information
•
Audio and media - operating the system
(p. 28)
•
Connecting and disconnecting a Bluetooth
®
device (p. 53)
Making and receiving calls
Functions for handling phone calls.
Incoming call
–
Press OK/MENU to answer incoming call.
The function is active even if the audio sys-
tem is in e.g. RADIO or MEDIA mode.
Refuse or end with EXIT.
In call menu
In the normal view for the phone source, one
press on OK/MENU during the current call gives
access to the following functions:
•
Mobile phone - the call is transferred from
handsfree to the mobile phone. For some
mobile phones the connection is interrupted.
This is normal. The handsfree function asks if
you want to reconnect.
•
Mute microphone - audio system micro-
phone is muted.
•
Dial number - option to call a third party
using the number keys (current call set in
standby).
Call register
The call register is mirrored in the handsfree
function at each new connection and is then
updated during the connection. In the normal
view for the phone source, turn TUNE to the left
to see the call register.
In the normal view for the phone source, you can
see the call register for the connected phone by
pressing OK/MENU and then selecting
Call list.
NOTE
To show the connected mobile phone's call
register in the car, mirroring must be accep-
ted in the mobile phone when it is connected.
Depending on the mobile phone, this can be
activated by means of the following:
•
a pop-up box or a notification is shown
and accepted in the phone.
•
accept sharing of information in the
phone's settings for the Bluetooth
®
con-
nection to the car.
In some cases it may be a requirement that
the mobile phone is disconnected and recon-
nected to the car in order for mirroring to be
activated.
Related information
•
Audio and media - operating the system
(p. 28)
•
Voice recognition - mobile phone (p. 66)
•
Bluetooth
®
handsfree phone (p. 57)
•
Bluetooth
®
handsfree phone - audio settings
(p. 60)
•
Phone book (p. 60)
To Next Page
Loading...