Ceramic Master E10 en v2 19
10. MAINTENANCE
11. DELIVERY SCOPE
Clean only with a dry or slightly moist cloth (no solvents!).
Change the safety locks with the announced valus only,
namely:
1.25A, slow (class T).
8A, slow (class T).
No repair activity by a service technician who is not
authorized by the manufacturer is allowed!
The lifting and carrying should be made only with the both
hands from below as the furnace stands on end.
No carrying and transportation in another state except for
vertical position is allowed!
Furnace CERAMICMASTER E10 1 pc.
Vacuum pump PVD-M22 1 pc.
Power cable 1 pc.
Flexible tube for the vacuum 1 pc.
Spare fuses
1.25А/250V 1 pc.
8A/250V 2 pc.
User Manual
PRODUCER: “VOP” Ltd.
2140 IZ “Microelectronika”
Botevgrad, Bulgaria
Теl. 0723 66303
Теl./Fax 0723 66304
To Next Page
Loading...