Ceramic Master E10 en v2 8
DESCRIPTION OF INDICATION
This furnace has 2 LINE LCD display.
The LINE 1 shows following information:
PROGRAM sector shows the number of the chosen
program for execution or the program for entering of
parameters.
°C sector shows the current temperature value in the firing
chamber.
The LINE 2 shows following information:
MODE sector shows information about current stage;
TIME sector shows the time left till the end of the executed
program.
Indicator 1: the furnace is in the phase of drying.
Indicator 2: the furnace is in the phase when the tempera-
ture increases to the value for firing.
Indicator 3: the furnace is in the phase of firing.
Indicator 4: the furnace is in the phase of cooling.
Indicator 5: the vacuum pump is switched on.
To Next Page
Loading...