25
English
My unit has
accumulated mineral
scale. How do I remove
it?
Attention Code LC
Attention Code A1
Attention Code CH
Attention Code CL
POSSIBLE CAUSE AND SOLUTIONPROBLEM
See MINERAL BUILD-UP for best practices on how to remove.
Unit is locked and settings can’t be changed. See HOW TO USE –
CONTROL LOCK.
Power head is not attached to the base; does not have proper power
connection. See HOW TO USE – ATTENTION CODES.
When the water tank runs out of water, “CH” code will ash on the
control panel until the tank is relled. Once water is added, “CH”
code clears and unit continues normal operation. See HOW TO USE
– ATTENTION CODES.
When the heat element has accumulated mineral scale and cleaning
is needed, “CL” code will ash on the control panel until cleaned.
Once clean, “CL” code will clear. See HOW TO USE – ATTENTION
CODES.
To Next Page
Loading...
