7
VORONDESIGN.COM
INTRODUCTION
FINAL THOUGHTS
VORON printers are amazing machines that take care and attention to assemble. Take your time! Little issues in the assembly phase tend to
stack up and cause you trouble later on. If at any point you get stuck or are just not sure about something, please ask on Discord. There are
no stupid questions and we’re more than happy to point you in the right direction.
MAINS POWER
VORON printer builds require 110v/220v wiring work. It’s important to understand what you’re doing to
avoid injury or death. Mains power can kill, and it will hurt the entire time you’re dying from it. If in doubt we
encourage you to ask questions. This is not something you want to guess your way through.
PRINTED PARTS
Not all prints come off the printer perfect and may require some nishing work. You may nd that you need
to do some light sanding to get some parts to sit ush with each other. Take your time to get the tment
right.
Best of luck on your build! The VORON Team looks forward to seeing your serial application soon!
To Next Page
Loading...
