VORON ERCF v2 - STL File Naming Convention

WWW.VORONDESIGN.COM
CAD version: ERCF V2
5
FILE NAMING
By this time you should have already downloaded our STL files from the Voron GitHub. You might have noticed that we have
used a unique naming convention for the files. This is how to use them.
5
PRIMARY COLOR
Example End_Bypass.stl
These files will have nothing at the
start of the filename.
ACCENT COLOR
Example [a]_End_Bypass_Foot.stl
These files have an ‘’[a]_’’ prefix to
denote that they should be printed
with an accent color.
QUANTITY REQUIRED
Example Filament_Path_xN.stl
Files ending with ‘’_x#’’ are telling
you the quantity of that part required
to build this system. For the ERCF,
‘’N’’ means the number of channels.
COLOR REQUIRED
Example
[c]_Cover_Lens_xN.stl
These files have a ‘’[c]’’prefix to
denote that they need to be printed in
a clear/transparent material.
COLOR REQUIRED
Example
[o]_Encoder_Slotted_Wheel.stl
These files have an ‘’[o]’’prefix to
denote that they need to be printed in
an opaque material light can’t
penetrate, preferably black.
OPTIONAL MULTIMATERIAL
Example
[mm]_Voron_Logo_Plate.stl †
These files have a ‘’[mm]’’prefix to
denote that they should be printed in
multiple colors. We always include
single-color versions of these files
too, for your first build.
INTRODUCTION
STL FILE KEY