Vox JamVOX - Quick Start; Listen to Guitar Programs

En-9
JamVOX installation/setup guide
Quick Start
Inthissectionwe’llexplainthebasicsofusingJamVOXbytakingyouthroughtheactual
stepsofoperation.
Step1 Listen to the sound of the guitar programs
1 ClicktheProgramSelectbuttons(/)locatedattherightoftheGuitarprogramname.
Clickingthesebutt
onswillmoveupordownthroughtheprogramsonebyone.Play
yourguitartotryouteachprogram.
HINT Yo
ucanals
ouseotherwaystoselectprograms.IntheHelpmenu,click“Owner’s
Manual...”toviewtheJamVOXOwner’smanual,andrefertothesection“Selecting
programs.”
2 ClicktheAmp/CabinetnamedisplayedabovetheEffectrout‐
ingsection.
IntheAmp/Cabinetcatalogthatappears,youcanchangethe
amp/cabinet.
HINT Yo
ucanals
ochangetheeffectunitsinthesameway.
3 Trydragginganddroppinganeffectdevicetothelocation
whereyouwanttoconnectit.
Youar
efreetochangeth
econnectedorderofalloftheeffect
units.
HINT Theamp/cabinetandeffectunitscanbeadjustedintheircorrespondingcontrol
panel.TheEffectcontrolpanelisshownfortheeffectdeviceyouselectbyclicking.
Eect routing
Program Select buttons
Guitar program
name
Amp/Cabinet
control panel
Eect Ctontrol
panel