VSI CLAROX plus - Appearance and Specifications; Intended Use

V X - 100 User Manual(v01 )
8
3. Appearance and Specifications
This device is a portable X-ray imaging device used to diagnose by generating and controlling X-rays.
It is structured to be easily moved to other places.
This device is composed of operation panel, high voltage generator (including X-ray tube), battery, etc.
It does not include Detector, A/D Convert, image software, and computer for image output.
No. Item Qt
y
Note
1 Main uni
t
1 -
2 Cone
(
For receptor
)
1
A
ttached to main uni
t
3
A
daptor 1 -
4 User manual 1 -
5 Cradle 1 -
3.1 Intended Use
VX-100 General purpose Portable X-ray equipment is intended to be used by trained radiologist
technicians as an radiography x-ray source for producing diagnostic x-ray images using image
receptors. Its use is intended for chest X-ray imaging.
The VX-100 should be used with an X-ray detector, and this detector has a digital type and a film type.
But the X-ray detector is not included in the VX-100 package.
The owner/operator is responsible for verifying continued compliance exposure rates, leakage
radiation, alignment of the useful beam, and the calibration of kVp and mAs. Annual verification by a
qualified service technician may be required by federal law. Compliance with applicable statutory and
regulatory requirements is the responsibility of the owner/operator. Consult local, state, and/or federal
agencies regarding specific requirements and regulations applicable to the use of this type of medical
electronic equipment.
Ensure the adapter is unplugged before attempting to clean. To make sure that power is off for
VX-100 while cleaning. Use a non-alcohol based disinfectant only - wipes or a cloth dampened
with liquid or spray. Do not use acetate or acetone cleaning solutions to prevent a damage of
plastic enclosures.
VX-100 and the accompanying adaptor are not designed to be subjected to any kind of sterilization
procedure. VX-100 is not designed to be used to sterilize anything else.