VTech AM18447 - Console Name; Hold Reminder

46
Telephone settings
Console setup
Console name
Use this feature to rename the console.
When the console is idle, press MENU/SELECT.
Press or to scroll to Console setup, then press MENU/SELECT or
/SKIP.
Press or to scroll to Console name, then press MENU/SELECT or
/SKIP.
Use the dialing keys to change the name (up to 10 characters).
Press DELETE to delete a character.
Press and hold DELETE to delete all characters.
Press /REPEAT or /SKIP to move the cursor to the left or right.
Press or to move the cursor to the beginning or end.
Press 0 to add a space.
Press MENU/SELECT to save the setting and return to the previous menu.
To exit without making changes, press CANCEL.
1.
2.
3.
4.
•
•
•
•
•
5.
Hold reminder
When the console holds an outside call or an intercom call for more than three
minutes, it gives you a double beep every 30 seconds. You can set its volume
to one of the six levels or mute the hold reminder.
When the console is idle, press MENU/SELECT.
Press or to scroll to Console setup, then press MENU/SELECT or
/SKIP.
Press or to scroll to Hold reminder, then press MENU/SELECT or
/SKIP.
Press , , or +/VOL/- to choose the desired volume or mute the feature.
Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
1.
2.
3.
4.
5.