83
All feature settings below apply to the auto attendant, announce only and
general mailbox answer modes.
Call screening
Use this feature to choose whether incoming messages can be heard over the
speaker when they are being recorded. This feature is set to On by default. You
hear the incoming message on your console when a call comes in.
When the console is idle, press MENU/SELECT.
Press or to scroll to Ans sys setup, then press MENU/SELECT or
/SKIP.
Press or to scroll to Call screening, then press MENU/SELECT or
/SKIP.
Press or to choose On or Off.
Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
Message length
Use this feature to set the maximum length of each recorded message. The
caller can record a message up to that specific time period.
When the console is idle, press MENU/SELECT.
Press or to scroll to Ans sys setup, then press MENU/SELECT or
/SKIP.
Press or to scroll to Message length, then press MENU/SELECT or
/SKIP.
Press or to choose 1 minute, 2 minutes or 3 minutes.
Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Answering system
Answering system setup
To Next Page
Loading...
Need help?
General