66
Assign a speed dial entry (continued)
To add a new phone number:
When the console is idle, press MENU/SELECT.
Press or to scroll to Speed dial, then press MENU/SELECT or /SKIP.
The screen displays Speed dial: Press a speed dial key to edit.
Press the desired speed dial key, or press LOWER followed by the desired
speed dial key, then press MENU/SELECT.
Press MENU/SELECT again to choose New number.
Use the dialing keys to enter a telephone number (up to 32 digits).
Press DELETE to delete a digit.
Press and hold DELETE to delete all digits.
Press /REPEAT or /SKIP to move the cursor to the left or right.
Press or to move the cursor to the beginning or end.
You can store the flash signal required by some special services as part
of a dialing sequence. Press FLASH and an F appears on the screen.
7. Press MENU/SELECT to move on to the name.
The display shows Number already saved if the number is already in the
directory. Go to the previous step and choose Add from DIR to assign
the speed dial entry.
8. When the screen displays Enter name, use the dialing keys to enter the
name (up to 24 characters).
Press DELETE to delete a character.
Press and hold DELETE to delete all characters.
Press /REPEAT or /SKIP to move the cursor to the left or right.
Press or to move the cursor to the beginning or end.
Press 0 to add a space.
9. Press MENU/SELECT to save and return to the previous menu. To exit
without making changes, press CANCEL or /REPEAT.
NOTES:
The newly added phone number will also be saved to the directory.
If you want to edit the phone number of the speed dial entry, you need to edit it in directory.
1.
2.
3.
4.
5.
6.
•
•
•
•
•
•
•
•
•
•
•
•
•
Telephone operation
Speed dial
To Next Page
Loading...
Need help?
General