www.vtechphones.com
13
Basic operation
Telephone operation
Temporary tone dialing
If you have pulse (rotary) dialing, you can change from pulse dialing to touch tone dialing during a
call by pressing *TONE. This is useful if you need to send touch tone signals for access to telephone
banking or long distance services.
1. Press *TONE when handset is off hook or on a call.
2. Dial the number.
3. After you hang up, the phone automatically returns to pulse dialing.
Headset jack
You can use this telephone handsfree when you install any VTech
2.5 mm headset, purchased separately.
Plug the headset into the jack located on the right side of the
handset (under the small rubber ap). Do not force the connection,
but make sure the plug ts securely.
To purchase a headset, visit us on the web at
www.vtechphones.com or call us at 1-800-595-9511. In Canada,
go to www.vtechcanada.com or call us at 1-800-267-7377.
• To purchase a
headset, visit us on
the web at www.
vtechphones.com.
In Canada go to
www.vtechcanada.
com.
To Next Page
Loading...
Need help?
General
