www.vtechphones.com
33
Basic operation
Answering system operation
Function: Command:
Delete message
Press 3 while message is playing. Press 33 during or after HELP
menu announcement to delete all old messages.
Record announcement Press *7; after beep, record announcement, press 5 to stop.
System plays back announcement.
Turn system off
Press 0; the system announces, “Calls will not be answered.”
Press 0 again to turn the system back on.
Turn system on
When system is off, it answers after 10 rings and announces,
“Please enter your remote access code”. Enter your remote
access code, then press 0 to turn the answering system on.
End call
Press 8.
• If no key is
pressed within
three seconds of
entering remote
access, the voice
menu will be
announced. After
the voice menu
announcement, if
no key is pressed
within 20 seconds,
the remote
access call will
automatically end.
• If accessing
from a touch
tone telephone,
press #5 to stop
recording.
• Press 8 to hang
up after you nish
remote access
to the answering
system, so that
your phone can
ring and receive
calls normally.
To Next Page
Loading...
Need help?
General
