VTech CareLine SN1157 - Page 46

38
Multiple handset use
To initiate an intercom call at the telephone base:
Press MENU, then scroll to Intercom, then press SELECT. Scroll
to the desired device and press SELECT. The telephone base shows
Calling HANDSET X/Calling all pendants/Calling all devices.
The destination device rings. The destination handset shows
BASE 0 is calling.
To answer the intercom call on the destination handset, press
,
or
any dialing key.
-OR-
To answer the intercom call on the pendant, press .
To end the intercom call at the telephone base, press END, CANCEL
or SPEAKER when you are using the base speakerphone, or
return the corded handset to the telephone base.
-OR-
To end the intercom call on the destination handset, one party
presses OFF, or places the handset back in the handset charger.
-OR-
To end the intercom call at the pendant, press or place the
pendant back in the pendant charger.
1.
2.
3.