9
Getting started and everyday use
Vibration alert
Use the vibration alert when you need to receive calls
without disturbing others, i.e. during meetings.
1 From standby,
c
to enter the menu,
2
e
to select Settings, then Vibration,
3
e
to set vibration mode On or Off,
c
to apply.
•
is displayed when vibration mode is selected.
Auto key lock
This feature automatically locks the keypad until you either
receive a call, or press and hold
#
. The keypad is locked
again after the incoming call ends, or after inactivity. The
symbol is displayed when the keypad is locked. To set:
1 From standby,
c
to enter the menu,
2
e
to select Settings, then Auto key lock,
3
e
to select ON (or OFF),
c
to apply.
Once set, press and hold
#
to unlock the keypad.
Manual key lock
You can manually lock and unlock the keypad at any time.
• Press and hold
#
to manually lock/unlock the keypad.
Hot keys
The hot key function allows you to quickly access a
regularly used feature by pressing and holding just one
key. Use the Hot Keys menu option to assign your chosen
phone functions to the keys
2
to
9
.
To set Hot keys:
Shortcut for keys that have not yet been assigned:
Press and hold the required key (
2
to
9
) until the
display shows ‘Not programmed’. When the display
then shows ‘Program hot key?’
c
or press
)
to
confirm. Now go to step 4 below.
1 From standby,
c
to enter the menu,
2
e
to select Settings, then Hot keys. The display will
show Key 2 and the current setting for that key,
3
e
to select the required key (2 to 9) and
c
to
accept. A list of phone functions will be displayed,
4
e
to select the required phone function and
c
to
apply that function to the key.
To Next Page
Loading...