Getting started and everyday use
16
Call times and charges
Your phone keeps a record of all incoming and outgoing
call durations. If your network supports an ‘Advice of
charge’ feature, you can also keep track of individual call
charges.
To view call times:
1 From standby,
c
to enter the menu,
2
e
to select Counters, then Time,
3
e
to select Last call, All calls out, All calls in or
Clear timers to reset all.
To set currency units:
Note: This feature appears only if supported by your
network and your SIM card.
1 From standby,
c
to enter the menu,
2
e
to select Counters, then Personal rate, then
Set rate,
3 Enter your PIN2 password (# symbols are displayed),
c
to enter,
4 Enter current ‘cost per unit’ advised by your network.
To view call costs:
Now when you view the Counters menu, select Charges
and choose from:
• Balance – shows call time left (limit minus current
consumption),
• Reset – sets cost counter to zero,
• Display limit – display the maximum cost or number
of units you want to use,
• Set limit – set the maximum cost or number of units
you want to use,
• Clear limit – removes the limit,
To display costs during calls:
Once the currency units have been set, you can display
the cost of calls as they are in progress.
1 From standby,
c
to enter the menu,
2
e
to select Counters, then Auto display,
3
e
to select On (or Off),
c
to enter.