15
Getting started and everyday use
Diverting calls
This service* allows you to set multiple call diversion
arrangements using the following factors:
• various phone conditions, e.g. when busy,
• different call types, e.g. voice, data, fax,
• separate, or combined divert destinations.
Note: Your Voice mail setting counts as a divert option.
To configure call divert:
1 From standby,
c
to enter the menu,
2
e
to select Divert.
3
e
to choose condition(s):
• Unconditional – Diverts all calls of the type(s) to be
selected in step 5 below - a
symbol is displayed
in the standby screen when this option is set,
• All unanswered – Diverts all calls that fall into any
of the three categories below,
• If busy – Diverts when phone is in another call,
• If no reply – Diverts any calls that you do not
answer.
• If not reachable – Diverts when phone is out of
coverage or switched off,
• Status check – Discovers current setup logged with
your network.
4
e
to select Activate, Deactivate (to cancel an
existing setup) or Status check (to discover current
setup),
c
to proceed.
5
e
to choose call type(s): Voice, Fax, Data or All.
6
e
to select the divert number – either from the
Phonebook or enter from keypad.
7
c
to confirm a summary of settings and initiate a
connection to register them with your network.
* Call divert functions are network and SIM card
dependant. You may or may not be offered this
service by your network provider.
To Next Page
Loading...
