Messages, Internet and data
26
To type text:
1 Press the keypad button that shows the required
letter - the first of the letters, printed on the button,
will be displayed (other character choices for that
button are also shown on the display).
2 If the first letter is not the one required, press the
same button repeatedly until the required letter is
displayed – you may need to practice this technique
as the letter is selected one second after the button
was last pressed (
a
to delete a mistake).
3 Repeat the above process for each letter to build
each word, with the aid of the following special
features:
• Spaces -
1
to insert a space,
• Move cursor - Click
e
to move the cursor back/
forward through the text, hold
e
to go to the start
or end,
• Case shift - Press
*
before a required button to
shift between upper and lower case (the arrow in
the lower left corner of the display shows the case
setting - down for lower case, up for upper case).
The initial letter is automatically capitalised,
• Shift/number lock – Press and hold
*
to change
between normal case (outline arrow in lower left
corner of the display), upper case shift lock (solid
arrow) and number lock (1 in a box) for entering a
series of numbers,
• Delete - Click
a
to delete a character, hold
a
to
delete the whole message,
• International characters - Numbers and Interna-
tional characters appear after the standard
characters shown on each button,
• Punctuation characters - Use
0
and
#
to
provide special characters:
•
0
provides . , 0 ? ! ” : ; @ £ $ ¥ ( ) < > _
•
#
provides # * + / - = & %
• Max. characters - Each message can have a
maximum of 160 characters (the counter x/160 in
the lower left corner shows the characters used).
• Phonebook entries - You can insert numbers
stored in your Phonebook:
1
c
to view message options,
e
to select
Phonebook,
2
e
to select required Phonebook entry,
c
to
insert.
To Next Page
Loading...
