Messages, Internet and data
36
To edit an existing profile:
Note: Profiles prefixed by a
symbol are locked and
cannot be directly edited (or deleted). However, you can
create a copy of a locked profile and then modify it - see
‘To create a copy of a locked profile’.
1 From standby,
c
to enter the menu,
2
e
to select WAP,
c
to enter,
3
e
to select Profiles,
c
to enter,
4
e
to select the required profile,
c
to enter,
5
e
to select Modify profile,
c
to enter.
• You will now be required to edit/confirm a series of
settings beginning with the Profile Name - refer to
the previous Profile details for descriptions of each
setting.
• For each setting, use the keypad to enter the
required details. See Entering profile information
that follows for tips on using the keypad.
6 When all of the necessary settings have been
entered, you will be prompted to Save changes? -
c
to confirm.
7 Once saved, the menu item Activate profile will be
displayed -
c
to enter and then
c
once more to
confirm.
The new profile will now be shown in the main WAP
menu as the Go to [profile name] option and will be
used as the standard Internet connection.
To create a copy of a locked profile:
Use this procedure if you wish to edit and use a profile
that is locked (signified by a
prefix).
1 From standby,
c
to enter the menu,
2
e
to select WAP,
c
to enter,
3
e
to select Profiles,
c
to enter,
4
e
to select Add entry,
c
to enter,
5
e
to select Use predefined,
c
to enter,
6
e
to select the required locked profile,
c
to enter,
• You will then be prompted to Activate My [profile
name]? -
c
to confirm.
• Now go to step 5 of the sub-section To edit an
existing profile.
To delete a profile:
Note: Profiles prefixed by a
symbol are locked and
cannot be deleted.
1 From standby,
c
to enter the menu,
2
e
to select WAP,
c
to enter,
3
e
to select Profiles,
c
to enter,
4
e
to select the required unlocked profile,
c
to
enter.
5
e
to select Delete,
c
twice to remove.
To Next Page
Loading...
