Messages, Internet and data
44
5 On your phone, without moving it,
c
to confirm
Activate IR for incoming data?
• the display will indicate Ready to receive - as
communication occurs between the devices, the
display should show activity messages such as
Transferring,
• if activity messages are not displayed, then the two
devices are not communicating correctly,
• your phone will halt infrared activity after 30
seconds if no data is transferred,
6 Once connection is made, use your computer and its
applications to control the data features of your
phone.
7 Use your computer to terminate data calls. However,
in cases where the computer loses control, terminate
calls in the usual manner with
\
To link your computer via cable:
1 Purchase the optional data cable accessory kit from
your supplier.
2 Follow the cable connection instructions provided
with the kit.
3 Create a modem/dial-up connection configuration on
your computer by following the instructions provided
with the kit.
• maximum serial link baud rate – 19,200bps,
• maximum modem speed connection speed –
9,600bps,
• if necessary, use modem initialisation string ATZ
4 Once connection is made, use your computer and its
applications to control the data features of your phone.
5 Use your computer to terminate data calls, however,
in cases where the computer loses control, terminate
calls in the usual manner with
\
To Next Page
Loading...
