28
Basic Operation
Remote Access Commands (continued)
Function: Command:
Record memo Press * 8 , then mailbox number
where you want memo recorded; speak
after beep; press # 5 when finished.
End remote access call Press * 0 .
Turn system off Press # 0 ; the system announces,
“Answering machine off.” Press # 0
again to turn the system back on.
Turn system on
NOTE: If no key is pressed within 10 seconds of entering remote access, the
voice menu will be announced. After the voice menu announcement, if no key is
pressed within 20 seconds, the remote access call will automatically end.
Function: Command:
Answering System Operation - Access From
a Remote Location
When system is off, it answers after 10
rings and announces, “Please enter your
security code.” Enter your remote access
code.
To Next Page
Loading...
