27
Basic Operation
Connect with the Answering System
You can access many features of this system remotely from a touch tone phone.
1 Dial your telephone number.
2 When the system answers, enter your Remote Access Code (preset to 50).
The system beeps once and then announces the number of new messages.
3 Enter a remote command (see “Remote Access Commands”).
4 Press * 0 to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation. Press
* 5 to hear the menu while remotely connected to the answering system
.
Remote Access Commands
Function: Command:
Play messages in Press # , then the appropriate mailbox
a mailbox number ( 1 , 2 , or 3 ). The system plays
new messages. If there are no new
messages, the system plays old messages.
Repeat a message Press # 4 while message is playing;
each press backs up another message.
Skip a message Press # 6 while message is playing;
each press advances up another message.
Stop Press # 5 .
Save messages Hang up.
Delete message Press # 9 while message is playing.
Review announcement Press # 7 ; system plays announcement,
then beeps.
Record announcement Press * 7 ; after beep, record announcement,
press # 5 to stop. System plays back
announcement.
Answering System Operation - Access From
a Remote Location
To Next Page
Loading...
