VTech DM1212 - Whats in the Box

4
5
What’s in the box
User’s guide
NOTESNOTE
• Use only the battery supplied with this product.
• If the parent unit will not be used for a long time, disconnect and remove the battery to prevent
possible leakage.
Install the parent unit battery
1
2
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT166342/BT266342 (2.4V 750mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine CR1937
3
4
1
2
3
4
Connect and charge the battery
1
Connect the baby monitor
NOTESNOTE
• Use only the power adapters supplied with this product.
• Make sure the baby monitor is not connected to electronically controlled electric power
outlet.
• Connect the power adapters in a vertical or floor mount position only. The adapter prongs
are not designed to hold the weight of baby monitor, therefore do not connect them to
any ceiling, under-the-table, or cabinet outlets. Otherwise, the adapters may not properly
connect to the outlets.
• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of
children.
• With audio reminder feature preset to ON, the parent unit plays an audio reminder when
it is linked to a baby unit.
2
1
2
1
2