VTech DM1212 - Positioning the Baby Monitor; Status Check

6
7
Power on or off the baby monitor
Press to power on the baby unit. The power light turns on.
Press and hold to power off the baby unit. The power light turns off.
Press and hold to power on or off the parent unit.
2
3
Status check
Once you power on and connect both your baby unit and parent unit, the parent unit displays
the current room temperature, and the baby unit power indicator light turns on.
26
o
C
26
o
C
4
Positioning the baby monitor
> 1m
>
2 m
<
2 m
NOTESNOTE
Note
• To avoid interference from other electronic
devices, place your baby monitor at least 1
meter away from devices such as wireless
routers, microwaves, mobile phones and
computers.
Caution
• The default volume of your parent
unit is level 3. If you experience
feedback noise from your baby
monitor while positioning:
- Make sure your baby unit and parent unit
are more than 2 meters apart, OR
- Turn down the volume of your parent unit.
>
2m
26
o
C
26
o
C
≥
<
1 m
1 m
﹏﹏﹏
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏
﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
Caution
• Keep the baby unit out of the reach
of your baby. Never place or mount
the baby unit inside the baby’s crib
or playpen.