VTech DM1212 - Set Default

14
15
Operations (Cont’d)
Lullaby
The baby monitor has five lullabies for you to comfort your baby. You can play or stop
lullabies playing on the baby unit from the menu in the parent unit.
1. Press when the parent unit is not in use.
2. Press or to choose LULLABY, then press .
3. Press or to choose a lullaby, or choose PLAY ALL, then press . The
screen displays PLAY or STOP.
4. Press to confirm your selection. The screen displays SAVED and you hear a
confirmation tone.
Notes
• If you choose a lullaby, the selected lullaby will be played repeatedly for about 20 minutes.
• If PLAY ALL is selected, the five lullabies will be played one after the other, until all of them are
played.
• When the lullaby is playing, the parent unit displays the name of the selected lullaby, or PLAY ALL
on the idle screen.
Temperature
Your baby unit monitors the temperature of your baby’s room with its built-in
temperature sensor. If the detected temperature is out of the preset temperature range,
the parent unit will display an alert message.
Set temperature format:
You can choose to display the temperature in Fahrenheit (
o
F) or Celsius (
o
C).
1. Press when the parent unit is not in use.
2. Press or to scroll to TEMPERATURE, then press .
3. Press or to choose FORMAT, then press . The screen displays
FAHRENHEIT? or CELSIUS?.
4. Press to confirm your selection, The screen displays SAVED and you hear a
confirmation tone.
Set temperature range:
You can set the desired room temperature alert range. The minimum temperature can
be set between 52
o
F (10
o
C) and 69
o
F (20
o
C). The maximum temperature can be set
between 70
o
F (21
o
C) and 86
o
F (30
o
C).
To set minimum temperature
1. Press when the parent unit is not in use.
2. Press or to scroll to TEMPERATURE, then press .
3. Press or to choose MINIMUM, then press .
4. Press or to choose the desired minimum temperature.
5. Press to confirm your selection, The screen displays SAVED. You hear a
confirmation tone.
To set maximum temperature
1. Press when the parent unit is not in use.
2. Press or to scroll to TEMPERATURE, then press .
3. Press or to choose MAXIMUM, then press .
4. Press or to choose the desired maximum temperature.
5. Press to confirm your selection, The screen displays SAVED. You hear a
confirmation tone.
Set temperature alert tone
You can turn on the temperature alert tone so that the parent unit will emit an alert tone if
the detected temperature is out of range.
1. Press when the parent unit is not in use.
2. Press or to scroll to TEMPERATURE, then press .
3. Press or to choose ALERT ON/OFF, then press . The screen displays
ON? or OFF?.
4. Press to confirm your selection, The screen displays SAVED. You hear a
confirmation tone.
Set default
Use this feature to restore to the default settings.
1. Press when the parent unit is in idle mode.
2. Press or to choose RESET, then press . The screen displays
CONFIRM?.
3. Press to confirm. The screen displays SAVED. You hear a confirmation tone.
-OR-
Press to exit the menu. The current setting remains unchanged.