VTech DS6621 User Manual

55
Answering system settings
Call screening
Use this feature to choose whether incoming messages can be heard while they
are being recorded.
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, and then
press SELECT.
Press or to scroll to Ans sys setup.
Press SELECT to choose Call screening.
Press or to choose On or Off.
Press SELECT to save and you hear a confirmation tone.
Number of rings
You can choose two, three, four, five or six rings; or toll saver.
With toll saver selected, the answering system answers after
two rings if you have new messages, or after four rings when
there are no new messages. This enables you to check for new
messages and avoid paying long distance charges when calling
from out of your local area.
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, and then
press SELECT.
Press or to scroll to Ans sys setup, and then
press SELECT.
Press or to scroll to # of rings, and then press SELECT.
Press or to choose 6, 5, 4, 3, 2 or Toll saver.
Press SELECT to save and you hear a confirmation tone.
If you subscribe to voicemail service from your telephone
service provider, see Answering system and voicemail on page 58.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
Ans sys setup
ECO
ANS ON
Call screening
ECO
ANS ON
On
ECO
ANS ON
# of rings
ECO
ANS ON
3
ECO
ANS ON

VTech DS6621 Specifications

Frequencies and Channels

DECT frequency	1921.536-1928.448 MHz
Bluetooth frequency	2402.000-2480.000 MHz
DECT channels	5
Bluetooth channels	79

Power Requirements

handset battery voltage	2.4 V
charger voltage	6 V
charger current	300 mA

Memory

phonebook memory locations	1000
phonebook digits capacity	30 digits
phonebook characters capacity	15 characters
caller ID log memory locations	50
caller ID log digits capacity	24 digits
caller ID log characters capacity	15 characters