61
Answering system operation
Message playback
On the telephone base, when playback begins, the total number of old or new
messages is announced, and the message window displays the message
number currently playing.
On a handset, when playback begins, the total number of old or new messages
is announced, and it displays the number of old and new messages.
Before each message, you hear the day and time of the recording. If the date and
time are not set, you hear, “Time and date not set,” before playback.
After the last message, you hear, “End of messages.”
If the recording time is less than three minutes, you hear, “Less than three minutes
to record.”
If there are no recorded messages, the screen shows No message and you hear,
“You have no message.”
To play messages at the telephone base:
Press /PLAY when the telephone base is not in use.
Options during playback:
Press
–
/VOL/
+
to adjust the message playback volume.
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message. Press twice to hear the
previous message.
Press X/DELETE to delete the playing message.
Press /STOP to stop the playback.
To play messages on a handset:
Press MENU when the phone is not in use.
Press SELECT to choose Play messages.
The answering system will play only new messages. If there is no new message, the
answering system will play old messages.
Options during playback:
Press VOLUME/ or VOLUME/ to adjust the message playback volume.
Press 6 to skip to the next message.
Press 4 to repeat the message. Press 4 during the time and day announcement
to hear the previous message.
Press 3 to delete the playing message.
Press OFF to stop the playback.
Press to switch between speakerphone mode and handset mode.
•
•
•
•
•
•
1.
2.
•
•
•
•
•
•
To Next Page
Loading...
Need help?
Frequencies and Channels
Memory
