VTech DS6621 User Manual

Getting started
5
Before use
After you install your telephone or power returns following a power outage, the
handset will prompt you to set the date and time, and the answering system
through voice guide.
If you choose to set up the date and time, and the answering system at a later
stage, you can do it manually.
Set date and time
Use the dialing keys (0-9) to enter the month, date, and year,
and then press SELECT.
Use the dialing keys (0-9) to enter the hour and minute.
Press or to choose AM or PM, and then press SELECT
to save.
To skip setting, press CANCEL.
After the setting for the date and time, the handset will display
Voice guide to... and set up Ans sys? alternatively.
Set answering system through voice guide
This feature assists you to do the basic setup of the answering
system. You can follow the voice guide to record your own
announcement, set the number of rings and the message
alert tone.
Press SELECT to start the voice guide for the answering
system setup. You hear the voice prompt “Hello! This voice
guide will assist you with the basic setup of your answering system.”
Setup your answering system by inputting the designated numbers as
instructed in the voice guide.
To skip setting, press CANCEL.
1.
2.
3.
•
1.
2.
•
Date: MM/DD/YY
ECO
Voice guide to...
ECO
set up Ans sys?
ECO

VTech DS6621 Specifications

Frequencies and Channels

DECT frequency	1921.536-1928.448 MHz
Bluetooth frequency	2402.000-2480.000 MHz
DECT channels	5
Bluetooth channels	79

Power Requirements

handset battery voltage	2.4 V
charger voltage	6 V
charger current	300 mA

Memory

phonebook memory locations	1000
phonebook digits capacity	30 digits
phonebook characters capacity	15 characters
caller ID log memory locations	50
caller ID log digits capacity	24 digits
caller ID log characters capacity	15 characters