VTech ErisStation VCS704 User Manual

14
Using the Menu
You can enter the menu to change the settings.
In the ringers menu, you can adjust the ringer volume and select the ringer tones for
incoming calls.
In the settings menu, you can change the settings for the date and time,
LCD language, base name, key tone, dial mode, area code, and loop gain. You can
also reset the base unit to default settings.
To enter the menu:
Press when the base unit is not in use.
Press or until the base unit displays the desired feature menu.
Press to enter that menu.
To return to the previous menu, press .
Ringer volume
You can adjust the ringer volume or turn the ringer off on the base unit.
Press or to sample each ringer volume level (Ringer off, or 1 to 6) when the
base unit is not in use.
Press to save your selection. You hear a confirmation tone.
-OR-
Press when the base unit is not in use.
Press or until the base unit displays Ringers, and then press .
The base unit displays Ringer volume. Press again.
Press or to sample each ringer volume level (Ringer off, or 1 to 6).
5. Press to save your selection. You hear a confirmation tone.
If you turn off the ringer volume, the screen will display Ringer off. When the ringer volume is off,
the base unit is silenced for all incoming calls.
1.
2.
3.
•
1.
2.
1.
2.
3.
4.
Settings

VTech ErisStation VCS704 Specifications

General

Brand	VTech
Model	ErisStation VCS704
Category	Conference Phone
Language	English