VTech ErisStation VCS704 - Area code and loop gain

Settings
18
Loop gain
The default settings of the loop gain feature is Off. Turn this feature on only when the
callers cannot hear you well, and you are using a public switched telephone network
(PSTN) line.
Press when the base unit is not in use.
Press or until the base unit displays Settings, and then press .
Press or until the base unit displays Loop gain, and then press .
Press or to choose On or Off.
Press to save your selection. You hear a confirmation tone.
Turn the loop gain feature back to Off if the callers cannot observe any improvement or are
experiencing any new audio issues like echo or dropout.
Reset
You can reset the base unit to the default settings
. Once the base unit is reset, all
your customized settings, call log entries, and
redial entry will be deleted. All the
phonebook records and speed dial entries will remain. The default settings are
listed below.
Feature Default Value
Call log Empty
Listening volume Volume 6
Ringer volume Volume 4
Ringer tone Tone 1
Date and time Empty
LCD language English
Base name ErisStation
Key tone level Level 2
Dial mode Touch-tone
Area code Empty
Loop gain Off
Press when the base unit is not in use.
Press or until the base unit displays Settings, and then press .
Press or until the base unit displays Reset, and then press .
The base unit displays Reset to default? Press . The settings are reset to
the default values and the screen returns to idle.
1.
2.
3.
4.
5.
1.
2.
3.
4.