VTech ES1810A - Change the System PIN Code; Set the ECO Range

34

A 4-digit system PIN code is used for changing the system
settings of the base station. It is used to protect your phone
against unauthorized use. The default system PIN code is
0000.
Press
MENU
OK
then
p
q
to select .
Press
MENU
OK
then
p
q
to select .
Press
MENU
OK
.
Enter the old system .
Press
MENU
OK
then enter the new system .
Press
MENU
OK
then enter the new system  again.
NOTE
If the new PIN entered in Step 6 is not matched with the new
system PIN entered in Step 5, you are requested to enter the
valid system PIN again in Step 5.
7. Press
MENU
OK
to confirm.

You can set the ECO range to HALF RANGE or FULL
RANGE. When ECO range is set to HALF RANGE, the
radiation between the base and handset will be lower, as well
as the range of the base.
Press
MENU
OK
and
p
q
to select .
Press
MENU
OK
and
p
q
to select .
Press
MENU
OK
and
p
q
to select  or 
.
Press
MENU
OK
to confirm.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.