VTech i5871 - Page 30

www.vtechphones.com
28
Basic operation
SILENCE
• You must
have at least
one additional
handset to
intercom call
from one
handset to
another handset.




Global Page from
HANDSET 1
Intercom call
• Any handset can then answer the page, and enter intercom mode by
pressing
/FLASH, , or any keys on the dialing pad.
• To end an intercom call, press
/CLEAR on the handset, or press
INTERCOM at the base unit.
From the base unit to a specic handset
• Press
INTERCOM at the base unit, and use the softkey or to scroll
to the desired handset (e.g., HANDSET 2), and press the softkey SELECT
to conrm.
• When the destination handset rings,
press /FLASH, , or any keys
on the dialing pad.
• To end an intercom call, press
/CLEAR on the handset or INTERCOM
at the base unit.
From one handset to all handsets and base unit:
• Press
MENU/SEL to display menu when in idle mode.
• Press the
DOWN NavKey three times to reach Intercom and press
MENU/SEL to enter the menu.
• Press
MENU/SEL and select Global Page.
• The base unit and all handsets will ring, and the screen displays
Global
Page from Handset 1 (if the global page is from handset 1).
• To answer the page on any handset,
press /FLASH, or any keys
on the dialing pad. To answer the page at the base unit, press INTERCOM
or /SPEAKERPHONE.